
Borehole Packer Accessories are available for use with borehole applications. Items include: inflation regulators, lifting bails, stuffing boxes, seating cones, feed-through adapters, flow systems, water inflation system, portable inflation line reel, packer inflation systems and other numerous spare parts.

Borehole Packers are suitable for a wide variety of applications in open or cased holes. Uses include permeability testing, monitor well sampling, packer piezometers, hydro-fracturing of formations, sealing artesian flows in open or cased boreholes and pressure grouting.

The Fall Cone Apparatus, first introduced in 1915, provides a rapid, simple and accurate method for determining empirically the undrained shear strength, the shear strength of remolded samples and thus the sensitivity of clays. The equipment is also used for determination of liquid WL (or fineness number WF). Four cones of different weights and apex angles are provided.

The RST Compaction Grout Monitor
System provides operators and engineers’ real-time display of key grouting
parameters to enhance the understanding of site conditions.

The RST Permeation Grout Monitor System provides operators and engineers near-real-time display of key grouting parameters to enhance the understanding of site conditions.

Detailed field investigation of
undrained shear strength and sensitivity of soft and medium stiff clays.
From 0-30 meters by hand jack, even through hard
layers of clay, sand or silt.
Two vane sizes: Measurements from 0-60 kPa & 0-100
kPa.
Top-level accuracy, results can be used for the design of
earth fill foundations and embankments.
Complies with ASTM standard

Preliminary
field investigation of undrained shear strength of soft to stiff clays.
Quick
and easy to use, low weight.
Direct
manual boring down to 3 meters
Three
vane sizes: Measurements from 0-200 kPa
Total
weight: 3,10 kg

Preliminary
field investigation of undrained shear strength of soft to medium stiff clays.
Geonor
180 degree slip-coupling system gives a better evaluation of rod-soil friction.
Direct
penetration to 10 meters without need for pre-boring.
Two
vane sizes: Measurement range from 0 to 80 kPa & 0-60 kPa.

K-100 & K-200 Thin Wall Sampler
The most commonly used samplers in Norway are the Geonor Thin Wall, Stationary Piston Samplers, K-100 and K-200. These are of high quality and designed for both undisturbed and agitated (representative) samples. Samplers are available for various sample diameters and for use in different soils. For sample analysis, see the Geonor laboratory equipment.