
Borehole Pressure Cells LPB0007E
Borehole Pressure Cells have a long term track record of stress monitoring in both elastic and viscoelastic rock.


Hydraulic Load Cells provide measurement of compressive loads between structural members.
RST Vibrating Wire NATM Stress Cells are designed to measure stresses in concrete (shotcrete) linings in tunnels and other underground workings.


Pile Tip Load Cells provide for measurement of load at the tips of driven piles,cast-in place piles, and drilled shafts.
Push-in Pressure Cell LPB0018G
A Push-in Pressure Cell is designed to be pushed into the ground where it can measure total earth pressure and pore water pressure within the soil. It can be used as a site investigation tool to determine the in situ stress state, both vertical and horizontal, depending on the direction of installation.

Straingauge Load Cells LPB0005F
Strain Gauge Load Cells provide measurement of loads in tie-backs, struts, ground anchors and rock bolts.

Total Earth Pressure Cells LPB0001J
Total Earth Pressure Cells are designed to measure stress acting on plane surfaces.

Vibrating Wire Load Cell LPB002I
Vibrating Wire Load Cells provide measurement of loads in tie-backs, struts, ground anchors and rock bolts.

Vibrating Wire Rebar Strain Meter
Vibrating Wire Rebar Strain Meters / Sister Bars are designed to be embedded in concrete for the purpose of measuring concrete strains due to imposed loads.

Vibrating Wire Straingauge ELB0007G
Vibrating Wire Strain Gauges are designed to be welded to or embedded in various structures for monitoring strain.